Atlona AT-AMS-HW handleiding
Handleiding
Je bekijkt pagina 16 van 57
Velocity with Integrated AMS
16
System Settings
• 802.1x Security - Enable or disable this by selecting
the slider. Enabling will allow the Velocity Gateway to
be authenticated and authorized when connected to a
network using 802.1x access control.
Networks
1. Select Networks from the top navigation inside of the Settings page.
• 802.1x Security - Enable or disable this by selecting
the slider. Enabling will allow the Velocity Gateway to
be authenticated and authorized when connected to a
network using 802.1x access control.
Network 1 - Corresponds with Ethernet Port 1 of the
software device and can be set between static IP, DHCP,
and DHCP server. If set as a DHCP server, a range of IP
addresses must be set so it can assign IP addresses for
anything else connected to the network.
Network 2 - Corresponds with Ethernet Port 2 of the
software device (where applicable) and can be set
between static IP and DHCP.
Multicast - Used for OmniStream set up and discovery.
View the OmniStream manual for more information on
Multicast, this information will be the same as the AMS
network multicast set up.
NOTE: To learn more about the OmniStream products,
visit the OmniStream page.
Bekijk gratis de handleiding van Atlona AT-AMS-HW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-AMS-HW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9501 MB |
