Atlas Sound FC-8DRV handleiding

Niet gecategoriseerd

Atlas Sound

43 pagina's

PDF beschikbaar

Handleiding

AtlasIED.com

TELEPHONE: (800) 876-3333

SUPPORT@ATLASIED.COM

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

INSTALLATION GUIDE

ISOFLARE™ PREMIUM LOUDSPEAKERS

FC SERIES

Step 7 – Terminate & connect loudspeaker wire to loudspeaker

Swing open the connector cover on the back of the loudspeaker to expose the input connector. Run the loudspeaker cable from the top through the cable clamp and into

the cavity. Pull extra cable through to work with.

On the loudspeaker wire, strip off approximately 3/16" (5mm) of insulation from each wire and insert the wire into the correct pin opening on the connector. Use a small

atheadscrewdrivertotightentheconnectoraroundthewire(Figure8).

ConnecttheInputpinstotheamplierupstream.ConnecttheOutputpinstoanyadditional70.7/100Vloudspeakersdownstreamortoasecondloudspeakerfor4Ω

operation, if used in low impedance mode.

Connect the loudspeaker wire to the loudspeaker input connector (Figure 9). Tighten the cable clamp and close the connector door.

Attach wire and cables

Figure 9Figure 8

Wiring Diagram

BLIND MOUNT - DROP CEILING TILE INSTALLATION (CONTINUED)

Bekijk gratis de handleiding van Atlas Sound FC-8DRV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.