Atlas Sound ECM-15SH handleiding
Handleiding
Je bekijkt pagina 8 van 16
AtlasSound.com – 8 –
ECM-15SH
AC
Power Conditioner & Suppression Module
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Using the ECM-15SH as a Standalone Unit
The ECM-15SH can be used as standalone unit for local equipment protection. It does not need to be connected to an ECS-6RM
to operate. You still get protection against AC spikes from lightning or short power surges and you get all the EMI/RFI power
conditioning and filtering. What you do not utilize is the Extreme Voltage Shutdown (EVS) protection and Voltage and Current status
readings. The ECM-15SH must be connected to an ECS-6RM to utilize all of the benefits of the ECM-15SH. To activate the ECM-15SH
via an external contact closure or switch, place the slide switch to “External Trigger” and apply the contacts across terminals “+” and
“D” shorting them together.
Remote Activation via Switch or DCV Trigger
To activate the ECM-15SH via a switch or DCV Trigger, apply DCV 5 -24VDC to the “+” and “G” terminals.
Wiring With an ECS-6RM Sequencer Controller
Example – ECS-6RM wired to 4 ECM-20 or ECM-20M Modules in the ECM-RACEWY6 and two separate ECM-15SH and ECM-20SH
modules.
Lamp
Slave Loop
(Not Ethernet)
Hard
Contact
Remote Status &
Activation
Note: After Changing Switch Settings,
the Unit’s Power Must Be Reset.
Remote ActivationChannel Relay Contacts (NO = Normally Open)
CH1
To/From ECM-20H
G
+
V A A NO
CH6 CH5
A NOD
Trigger
Voltage
Signal
Status
CH2
To/From ECM-20H
CH3
To/From ECM-20H
CH4
To/From ECM-20H
CH5
To/From ECM-20H
CH6
To/From ECM-20H
Momentary
In
Out
24 DC IN
+
–
0
1
A B C D E
Off
On
A NO
CH4 CH3
A NO A NO
CH2 CH1
A NO RMT V IN
GND
EPD
+12VDC
G
+
V A D
Trigger
Voltage
Signal
Status
G
+
V A D
Trigger
Voltage
Signal
Status
G
+
V A D
Trigger
Voltage
Signal
Status
G
+
V A D
Trigger
Voltage
Signal
Status
G
+
V A D
Trigger
Voltage
Signal
Status
Note:
See Top Cover
for Settings
120V AC 60Hz
15A Max 1800W
Internal Fuse
15A 250V 3AB (Slow Blow)
Status
Signal
D A V G
+
Trigger
Voltage
Manual
On
External
Trigger
Active
AC Fault
Incoming
AC
120V 60Hz
12A 1440W
Total
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. • AtlasSound.comEngineered in the U.S.A., Made in China
120V 60Hz
16A 1920W
Total
Manual
On
External
Trigger
Active
AC Fault
Incoming
AC
Internal Fuse
20A 250V 3AB (Slow Blow)
+
G
Trigger
Voltage
Status
Signal
V
A
D
ECM-20SH
20A AC Power Module
Suppressor & Conditioner
Bekijk gratis de handleiding van Atlas Sound ECM-15SH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlas Sound |
| Model | ECM-15SH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2934 MB |
