Atlas Sound AP-S15HRIP handleiding

Niet gecategoriseerd

Atlas Sound

40 pagina's

PDF beschikbaar

Handleiding

AP-S15HRIP / AP-S15IP / AP-S158IP

Owner’s Manual

– 13 –

AtlasIED.com

TELEPHONE: (800) 876-3333

SUPPORT@ATLASIED.COM

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

Configuration 1 - Mounting a Single 1 RU Model

1. Remove amplifier from electrical source.

2. Remove the four feet.

3. Align and secure the chassis extension plate to a rack mount ear with the enclosed screws and nuts.

4. Locate the two open holes on each side of the amp located towards the front panel.

5. Align the enclosed rack mount ear and extension assembly to the chassis holes located in step 4.

6. Use the enclosed chassis screws to attach the rack ears and extension assembly to the chassis. Secure firmly, do not over tighten. Repeat step

for opposite chassis side.

7. Disregard extra pieces.

8. Ready for rack installation. Note: It is important the amplifiers have the proper clearance around it for proper heat dissipation. Always allow at least

1.75" around the amplifier for to assure safe operation. Never mount an amplifier in an enclosed air tight rack. All racks must have air vents on all

sides or forced air cooling to assure proper heat dissipation.

M4 x 10mm Pan Head Screw

M4 Hex Nut

M4 x 8mm Pan Head Screw

Bekijk gratis de handleiding van Atlas Sound AP-S15HRIP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.