Atlas Sound AP-S15HRIP handleiding

Niet gecategoriseerd

Atlas Sound

40 pagina's

PDF beschikbaar

Handleiding

AP-S15HRIP / AP-S15IP / AP-S158IP

Owner’s Manual

– 11 –

AtlasIED.com

TELEPHONE: (800) 876-3333

SUPPORT@ATLASIED.COM

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

Unit Features

8. Remote LED Display Port (Included Accessory) - This display control port mates with the included LED display, model AP-LEDIP. This display will

provide a visual reference for the voltage, current, temperature or humidly data within the rack in real time. The AP-LEDIP can also be used to read

the IP address of the unit eliminating the need to use the discovery software.

9. AC Power Programmable Outlets - The AP-S158IP and the AP-S15IP feature eight programable NEMA 5-15P AC switched outlets and the

AP-S15HRIP has five. These switched AC outlets are “live” when the front panel power switch is in the ON position and the outlet is activated via

the WEB interface or by pressing the AC outlet indicator ON/OFF switch (see AC outlet Switches & indicators) If the AC outlet’s corresponding

outlet indicator is illuminated green, the AC outlet is active and AC voltage will be present.

10. AC Outlet ON/OFF Switches and Indicators - Each unit includes AC Outlet ON/OFF switches that also serve as outlet active indicators. Press

the corresponding outlet switch firmly to manually turn a specific AC Outlet ON or OFF. The switch will illuminate green when the corresponding

AC outlet is on. The AC outlets can also be activated by using the interface. Note: The AC Output ON/OFF function can be programmed to be

disabled in the web interface.

Alarm Indicators - The AP-IP power distribution systems feature alarms for the following: Over & Under Voltage, Over Current, Over Temperature

and Over Humidity. All alarm settings are programmed in the web UI. If an alarm is activated, the associated LED will illuminate and the fault

contacts will open.

Factory Reset Switch - The Factory Reset switch is located in the front panel as indicated in the picture below. Insert a small object like a paper

clip into the hole to access the switch. Gently press and hold the switch inward for 3 seconds, then release. The unit’s outlets and display will shut

off and turn back on indicating the Factory Reset was successful. The Factory Reset switch will reset all functions that were previously

programmed and will also reset the unit to accept DHCP IP address. Note: Any custom passwords will be replaced by the last 4 digits of the MAC

address. Before resetting the unit, it is important to write down any special settings that may have been adjusted. Refer to the section Logging

into the Unit for details.

11. Unswitched Outlet (Not Shown in AP-S158IP)

• A Unswitched AC outlet is not programable

• The AP-S15IP has an unswitched AC outlet that is always live even if the AC mains power switch is in the OFF position. This outlet is protected

by the AC mains breaker, surge protection and by RF filtering.

• The AP-S15HRIP has a switched AC outlet that is turned ON/OFF with the AC mains power switch. This outlet is protected by the AC mains

breaker, surge protection and by RF filtering

Bekijk gratis de handleiding van Atlas Sound AP-S15HRIP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.