Atlantis Land SM20-DH12 handleiding

43 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 29 van 43
29
Programming must be carried out for each individual key,
carefully following the instructions below:
The remote control has 4 programmable buttons for
controlling the TV: TV Power, Vol +, Vol-, TV/AV.
Long press the SET button for 10 seconds, the red LED will
be from low light to brighter light, release the SET button.
Place the learning and the original remote control from the
TV opposite to each other at a distance of 2-3 cm and pay
attention on IR aligmement.
Press and release the learning remote control button you
want to program, the red LED will light blinking.
[TV RC] Press the button of the original remote control, the
LED should blink 2 times and light constantly, release the
button.
When learning is completed, press the SET button, the LED
will turn off.
Repeat this for the other buttons.
The battery charge should be as high as possible.
1.4 Wiring and Setup
Battery Installation
Remove the cover from the back of the remote control and insert 2 AAA batteries (not
included) into the compartment, making sure that the polarities match those indicated.
The remote control must be used pointing it at the IR receiver located on the front

Bekijk gratis de handleiding van Atlantis Land SM20-DH12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAtlantis Land
ModelSM20-DH12
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3541 MB

Caratteristiche Prodotto

Kleur van het productZwart
Gewicht43 g
Breedte150 mm
Diepte16 mm
Hoogte37 mm