ATen VS194 handleiding
Handleiding
Je bekijkt pagina 21 van 38
3. Operation
13
Command for Cascaded Splitters
Serial port commands for cascaded splitters require identifying the chain of
ports to which the target device is connected. The formula for Switch Port
commands are as follows:
Switch Command + Output + Port + Port at first stage + Port at second
stage + Control [Enter]
For the example above, the command for switching to the target output Port 1
of the splitter connected to Port 1 at the second stage of the cascade, which, in
turn, is connected to output Port 2 at the first stage unit, is as follows:
sw o01-02-01 on [Enter]
This cascade command format is applied to Mute Commands, page 15, Read
Commands, page 17, and Reset Commands, page 18. However, this is not
applicable to EDID commands, which apply only to the first stage unit splitter,
as well as the Firmware commands.
First stage unit
Second stage unit/s
Third stage unit/s
Targ e t
output
Bekijk gratis de handleiding van ATen VS194, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | VS194 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2990 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 300 g |
| Gebruikershandleiding | Ja |
| Materiaal behuizing | Metaal |
| Kleur | Ja |
