ATen VS194 handleiding
Handleiding
Je bekijkt pagina 16 van 38
VS172 / VS174 User Manual
8
Single Stage Installation
Refer to the installation diagram (the numbers in the diagram correspond to the
numbers of the steps) and do the following:
1. Use a male-to-male DVI cable to connect your source device’s DVI port to
the VS172 / VS174’s Video In port.
2. Use a male-to-male audio cable to connect your source device’s speaker
port to the VS172 / VS174’s Audio In port.
3. Plug your DVI monitors and speakers into the A/V Out ports.
4. (Optional) To edit the VS172 / VS174 system settings through the RS-232
port, connect the hardware / software controller here.
5. Plug the power adapter that came with your switch into an AC power
source, then plug the power adapter cable into the switch’s Power Jack
Note: The VS174 is pictured above. The VS172 rear panel is the same as the
VS174, except that it has 2 A/V outputs s instead of 4.
1
2
5
or
3
4
Bekijk gratis de handleiding van ATen VS194, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | VS194 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2990 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 300 g |
| Gebruikershandleiding | Ja |
| Materiaal behuizing | Metaal |
| Kleur | Ja |
