ATen US3311 handleiding

44 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 18 van 44
US3311 User Manual
8
1. Connect up to 4 USB peripherals such as a USB mouse, USB keyboard,
printer, or external hard drive to the unit’s USB Type-A ports.
2. Connect a USB-C source device to the unit’s USB-C port (source 1).
3. Connect another USB-C source device to the unit’s USB-C port (source 2).
4. Connect a DisplayPort-enabled display to the unit’s DisplayPort output
port.
5. Connect the supplied port switch button to the indicated jack.
6. Connect the power adapter to the unit’s power jack.
7. (Optional) You can connect your source device to the USB-C port (power)
for PD laptop charging.
Note: For device charging, a Limited Power Source (LPS) certified USB-
C PD Power Adapter over 65 watts is recommended. The system
power requirement for basic USB functions and video output should
be at least 5V, 3A.
Operation
Press the port switch button to switch KVM control between the two USB-
C source devices. The port LED for the selected port lights white.
Press and hold the port switch button for 3 seconds if you encounter any
monitor compatibility issues.
Please see the table below for USB standards and video resolutions
when you switch between 2 lane and 4 lane modes for US3311. The
port 1 and port 2 status LEDs light once to indicate the US3311 is
switched to 2 lane mode, and light twice to indicate the US3311 is
switched to 4 lane mode.
DP 1.2 DP 1.4
USB Resolution USB Resolution
2 Lane 3.0 4K30 Hz 3.0 4K60 Hz
4 Lane 2.0 4K60 Hz 2.0 8K60 Hz

Bekijk gratis de handleiding van ATen US3311, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkATen
ModelUS3311
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3475 MB

Caratteristiche Prodotto

Kleur van het productAluminium
Ingebouwd displayNee
Gewicht350 g
Breedte119 mm
Diepte143 mm