ATen CS1964 handleiding
Handleiding
Je bekijkt pagina 35 van 56
Chapter 4. Hotkey Operation
27
Buzzer Control
The buzzer can be turned on or off. To turn the buzzer on/off, do the following:
1. Invoke HSM (see page 24
).
2. Press and release [B].
Hotkey Port Switching
To enable/disable hotkey port switching, do the
following:
1. Invoke HSM (see page 24).
2. Press [X] [Enter].
When disabled, port switching hotkeys [Scroll Lock] [Scroll Lock] (and the
alternative [Ctrl] [Ctrl]) will not work.
Firmware Upgrade Mode
To enter Firmware Upgrade Mode, do the following:
1. Invoke HSM (see page 24).
2. Key in: upgrade
3. Press [Enter].
The front panel LEDs flash to indicate Firmware Upgrade Mode is in
effect.
Note: To exit Firmware Upgrade Mode, you must power off the switch.
Restore Default Settings
To reset the CS1964 to its default Hotkey settings, do the following:
1. Invoke HSM (see page 24).
2. Press [R] [Enter].
All Hotkey settings return to the factory default settings.
Bekijk gratis de handleiding van ATen CS1964, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | CS1964 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3825 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1930 g |
| Breedte | 156 mm |
| Diepte | 335 mm |
| Hoogte | 655 mm |
