ATen CS1964 handleiding
Handleiding
Je bekijkt pagina 26 van 56
CS1964 User Manual
18
Mouse Switching
For mouse port selection: Double-click the scroll wheel of your USB mouse to
cycle through the ports.
Note: 1. Mouse switching is only supported by USB 3-key scroll wheel mice.
2. Mouse switching is disabled by default. See Hotkey Setting Mode
(HSM), page 24, to enable mouse switching.
3. Mouse switching is only supported when Mouse Emulation is
enabled.
Hotkey Switching
For Hotkey port selection: All port switches from the keyboard begin by
pressing the Scroll Lock key twice. Regarding details of the Hotkey
parameters, see Hotkey Operation, page 21.
Hot Plugging
The CS1964 supports USB hot plugging – components can be removed and
added back into the installation by unplugging their cables from the USB hub
ports without the need to shut the unit down.
Powering Off and Restarting
If it becomes necessary to power off the CS1964 unit, before starting it back
up, you must do the following:
1. Shut down all the computers that are attached to the switch.
2. Unplug the switch’s power adapter cable.
3. Wait 10 seconds, then plug the switch’s power adapter cable back in.
4. Once the switch is powered up, power on the computers.
Port ID Numbering
Each KVM port section on the CS1964 switch is assigned a port number (1 to
4). The port numbers are marked on the rear panel of the switch (see page 6 for
details).
Bekijk gratis de handleiding van ATen CS1964, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | CS1964 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3825 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1930 g |
| Breedte | 156 mm |
| Diepte | 335 mm |
| Hoogte | 655 mm |
