ATen CM1942 handleiding
Handleiding
Je bekijkt pagina 48 van 60
CM1942 User Manual
36
5. Press and hold the mode pushbutton or remote port selector pushbutton.
6. While holding the mode pushbutton or remote port selector pushbutton,
connect the USB Type-B connector into the any available USB Type-B
socket from the KVM ports section.
7. Connect the USB Type-A connector to a USB Type-A port on the
computer.
8. Power on the CM1942. The port LEDs flash orange together to indicate
Firmware Upgrade Mode is in effect.
You can also connect a keyboard to the console port and invoke the
Firmware Upgrade Mode via hotkey. See Firmware Upgrade Mode,
page 24.
Note: While the CM1942 is in Firmware Upgrade Mode, normal keyboard
and mouse functions are suspended. You must complete the
firmware upgrade or exit Firmware Upgrade Mode to regain normal
control of the console.
5
6
4
CM1942
(Top)
CM1942
(Rear)
Remote Port
Selector
4
Bekijk gratis de handleiding van ATen CM1942, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | CM1942 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4151 MB |
