ATen CM1942 handleiding
Handleiding
Je bekijkt pagina 35 van 60
Chapter 4. Hotkey Operation
23
Keyboard Operating Platform
The CM1942’s default port configuration is for a PC compatible keyboard
operating platform. If your console uses a PC compatible keyboard and you
have a Mac or Sun attached to a port, for example, you can change the port’s
keyboard operating platform configuration so that the PC compatible keyboard
emulates the Mac or Sun keyboard. The procedure is as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see page 21).
3. Press and release the appropriate Function key (see table below). After
completing this procedure, you automatically exit HSM.
List Switch Settings
To see a listing of the current switch settings, do the following:
1. Open a text editor or word processor and place the cursor in the page
window.
2. Invoke HSM (see page 21).
3. Press and release [F4] to display the settings.
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 21).
2. Press and release [F5].
Function Key Operation
[F1] Sets the SPC mode so that it can work under special
operating systems as a standard (104 key) keyboard.
[F2] Enables Mac keyboard emulation, see page 33, for details.
[F3] Enables Sun keyboard emulation, see page 34, for details.
[F10] Enables Windows keyboard emulation.
Bekijk gratis de handleiding van ATen CM1942, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | CM1942 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4151 MB |
