ATen CL1316 handleiding
Handleiding
Je bekijkt pagina 64 van 80
CL1308 / CL1316 User Manual
54
Upgrade Failed
If the firmware upgrade fails (Upgrade Succeeded screen does not appear), you
can recover the situation.
Possible reasons for firmware upgrade failure are:
When a firmware upgrade was manually aborted.
When the unit’s firmware becomes corrupted for some reason and you are
unable to operate it.
When a firmware upgrade procedure is interrupted.
When a firmware upgrade procedure fails.
To recover a failed firmware upgrade, do the following:
1. Click Cancel to close the Firmware Upgrade Utility.
2. Power off the unit.
3. Connect the firmware upgrade cable to its firmware upgrade port.
4. Slide the firmware upgrade switch to the Recover position.
5. Power the unit back on and repeat the upgrade procedure (see Starting the
Upgrade on page 51).
6. After the unit has been successfully upgraded, power it off, and slide the
firmware upgrade switch back to the Normal position.
7. Power the unit back on again.
Bekijk gratis de handleiding van ATen CL1316, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | CL1316 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6252 MB |
