ATen CL1308 handleiding
Handleiding
Je bekijkt pagina 15 van 80
Chapter 1. Introduction
5
No. Component Description
1 handle Pull to slide the KVM module out; push to slide the module in
(see item 2 in this table).
2 slide release In order to slide the console out, you must first release it by
sliding these tabs to the inside. See page 17 for details on
sliding the console in and out.
3 LCD display After sliding the KVM module out, flip up the cover to access
the LCD monitor.
4 LCD controls The LCD On / Off switch is located here, as well as buttons to
control the position and picture settings of the LCD display.
See page 21 for details.
5 port LEDs
An orange ON LINE LED lights to indicate that the com-
puter attached to its corresponding port is up and running.
An orange ON LINE LED flashes to indicate that the corre-
sponding port is being used for cascading to another
switch.
A green Selected LED lights to indicate that the computer
attached to the corresponding port is selected for KVM
control.
6 keyboard Standard 105-key keyboard
7 touchpad Standard mouse touchpad
8 port switches Press the port pushbuttons to bring the KVM focus to the
computer attached to the corresponding port.
9 power LED Lights to indicate that the unit is receiving power.
10 rack mount
brackets
The rack mount brackets located at each corner of the unit
secure the chassis to a system rack.
11 lock LEDs Num Lock, Caps Lock, Scroll Lock LEDs are located here.
12 reset button Located to the right of the Lock LEDs. Press this button in
with a small object to perform a system reset.
13 firmware
upgrade
section
Firmware upgrade port: The firmware upgrade cable that
transfers the firmware upgrade data from the administra-
tor's computer to the CL1308 / CL1316 plugs into this RJ-
11 connector.
Firmware upgrade switch: During normal operation this
switch should be in the NORMAL position. (See The Firm-
ware Upgrade Utility, page 49 for firmware upgrading
details.)
14 LED illumination
light
Illuminates the keyboard and touchpad to allow visibility in
low-light conditions.
Bekijk gratis de handleiding van ATen CL1308, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | CL1308 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6252 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Gewicht | 12590 g |
| Breedte | 483 mm |
| Diepte | 689.2 mm |
