ATen CE840 handleiding
Handleiding
Je bekijkt pagina 17 van 35
Chapter 1. Introduction
7
11 audio input port Receives cables from the microphone (pink).
12 audio output port Receives cables from the speaker (green).
13 RS-232 serial port Receives an RS-232 serial cable which connects to a
hardware/software serial control device.
14 long reach mode
switch
Put the switch to ON to enable the long reach mode to
transmit HDMI signals up to 150m, at 1080p. For details,
see Long Reach Mode, page 17.
Note:
The long reach mode is only supported by CE840 using
firmware version v1.0.064 or later.
When the long reach mode switch is switched and turned
on, the CE840 will reboot itself to activate the long reach
mode.
15 firmware upgrade
switch
This function is reserved for ATEN Technical Support. If you
would like to do a firmware upgrade yourself, please
contact your dealer.
No. Component Description
Bekijk gratis de handleiding van ATen CE840, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | CE840 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2370 MB |
