Atdec AWM-LTHT handleiding

Handleiding

123/ 3

Afdrukken

Je bekijkt pagina 2 van 3

AWM-LTHT Page 2 of 3

1.1 Slide release switch up

and click into unlocked

position, then remove VESA

head from the tilt head.

1.2 Check VESA mounting compatibility of monitor.

Click

Slide

100mm

75mm

100mm

75mm

NOTE: For other sizes, use a suitable adaptor plate

(sold separately).

1. Attach VESA head to monitor

1.3 Attach VESA head onto monitor with provided screws.

(Alternatively, use fasteners specied by the monitor manufacturer).

OK

Too long

Monitor

VESA Plate

VESA Screw

Too short

NOTE: Ensure screw length suits the

monitor VESA mounting holes.

2. Attach tilt head onto arm

2.1 Push tilt head onto the

shaft at the end of the

monitor arm.

2.3 Tighten the joint screw with

4mm Hex Key.

NOTE: Check the tilt

head rotation is smooth

after tightening.

2.2 Ensure tilt head is fully pushed onto shaft.

IMPORTANT! Ensure plastic

sleeve is tted on shaft before

attaching tilt head.

123/ 3

Bekijk gratis de handleiding van Atdec AWM-LTHT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Atdec (Niet gecategoriseerd)

Handleiding bekijken

Atdec AWM-S

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd