Handleiding
Je bekijkt pagina 43 van 46
3-18
Chapter 3: General Instruction
3.4 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON • Press the button to check if the monitor is
turned on.
• Check if the adapter and power cord are properly
connected to the monitor and the power
outlet.
• Check the Power Indicator function in the
OSD menu. Select “ON“ to turn on the power
LED.
The power LED lights red and
there is no screen image
• Check if the monitor and the computer are
turned on.
• Make sure the signal cable is properly connected
to the monitor and the computer.
• Inspect the signal cable and make sure none of
the pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or
dark
• Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces, a wave
pattern or abnormal picture is
present in the image
• Make sure the signal cable is properly connected
to the monitor and the computer.
• Move electrical devices that may cause
electrical interference.
• Remove the adapter and plug it again to the
power outlet. Then turn on the monitor.
Screen image has color
defects (white does not look
white)
• Inspect the signal cable and make sure that
none of the pins are bent.
• Perform All Reset via OSD.
• Select the appropriate color temperature (Color
Temp.) via OSD.
No sound or sound is low • Adjust the volume settings of your monitor or
computer.
• Make sure the computer sound card driver is
properly installed and activated.
• Check the audio source.
Bekijk gratis de handleiding van Asus ROG Swift OLED PG27AQDP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asus |
| Model | ROG Swift OLED PG27AQDP |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4492 MB |
