Asus R2314I-IM-A handleiding
Handleiding
Je bekijkt pagina 66 van 70
66
Industrial motherboard
Safety information
Your Industrial motherboard is designed and tested to meet the latest standards of safety for information
technology equipment. However, to ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
• Read and follow all instructions in the documentation before you operate your system.
• Do not use this product near water or a heated source.
• Set up the system on a stable surface.
• Peripherals with extended temperature tolerance (such as industrial grade DRAM and SSD) will allow this
product to be used in environments with ambient temperatures between -20˚C and 60˚C, with a 0.1m/s air
flow. If you plan to use a 2.5” HDD with this product, please use this product in environments with ambient
temperatures between 0˚C~45˚C, with a 0.1m/s air flow.
• The product should be used in environments with an ambient temperature of 45˚C when using the 65W
adapter, whilst using HDD or SDD only and without the PoE module installed.
• If you use an extension cord, make sure that the total ampere rating of the devices plugged into the
extension cord does not exceed its ampere rating.
• This equipment should be installed and operated with a minimum distance of 20cm between the radiator
and your body.
• Restricted Access Location:
The equipment should only be installed in a Restricted Access Area where both these conditions apply:
- access can only be gained by USERS who have been instructed about the reasons for the restrictions
applied to the location and about any precautions that shall be taken; and
- access is through the use of a TOOL or lock and key, or other means of security, and is controlled by the
authority responsible for the location.
• This device shall not be connected to an Ethernet network with outside plant routing.
Care during use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned off, a small amount of electrical current still flows. Always unplug the power cord
from the power outlets before cleaning the system.
• If you encounter the following technical problems with the product, unplug the power cord and contact a
qualified service technician or your retailer.
- The power cord or plug is damaged.
- Liquid has been spilled into the system.
- The system does not function properly even if you follow the operating instructions.
- The system was dropped or the cabinet is damaged.
- The system performance changes.
• Avoid contact with hot components inside the Mini PC. During operation, some components become hot
enough to burn the skin. Before you open the computer cover, turn off the computer, disconnect the power,
and wait approximately 30 minutes for the components to cool.
Bekijk gratis de handleiding van Asus R2314I-IM-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asus |
| Model | R2314I-IM-A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5688 MB |
