Asus R2314I-IM-A handleiding
Handleiding
Je bekijkt pagina 52 van 70
52
Industrial motherboard
4.4.13 APM Configuration
Allows you to configure the Advance Power Management (APM) settings.
Restore AC Power Loss
[S5 State] The system goes into OFF state after an AC power loss.
[S0 State] The system goes into ON state after an AC power loss.
Power On By PCIE
Allows you to enable or disable the wake-on-LAN function for the onboard LAN controller or other installed
PCIE LAN cards.
Configuration options: [Disabled] [Enabled]
Po
wer On By Ring
[Disabled] Disables the Ring devices to generate a wake event.
[Enabled] Enables the Ring devices to generate a wake event.
Power On By RTC
Allows you to set your system to power up to execute tasks on a set schedule or on a particular day.
Configuration options: [Disabled] [Single event] [Daily event] [Weekly event] [Monthly event]
4.4.14 Network Stack Configuration
Allows you to configure the network stack configuration.
Network Stack
Allows you to enable or disable UEFI Network Stack.
Configuration options: [Disabled] [Enabled]
NO
TE:
The following items appear only when Network Stack is set to [Enabled].
Ipv4 PXE Support
Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be created.
Configuration options: [Disabled] [Enabled]
Ip
v6 PXE Support
Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be created.
Configuration options: [Disabled] [Enabled]
Bekijk gratis de handleiding van Asus R2314I-IM-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asus |
| Model | R2314I-IM-A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5688 MB |
