Asus PE2200U handleiding
Handleiding
Je bekijkt pagina 68 van 100
68
PE Series
To install a 5G NR module:
1. Remove the screw from the M.2 standoff.
2. Align and insert the 5G NR module into the slot.
3. Press down, and then secure it in place using the screw previously
removed.
NOTE: We recommend using a PH1 screwdriver with a torque of
2.0±0.2kgf-cm when tightening the screw.
4. (Optional) Connect the RF cables from the antennas to your 5G
NR module. Make that the correct cable is attached to each of the
connectors by following chart on the next page.
NOTE:
• To enable the hot-plug function of your 5G NR module, click the
weston-terminal icon in the upper left corner of your screen, and
type the first command below when prompted:
mm_cli sim-detect 1 (enable hot-plug function)
mm_cli sim-detect 0 (disable hot-plug function)
mm_cli sim-detect (display current setting)
• Refer to Installing antennas for more information on installing the
antennas.
• Connecting antennas to your 5G NR module may strengthen the
signal.
• A soft clicking sound indicates that the antenna has been securely
attached on the 5G NR module.
Bekijk gratis de handleiding van Asus PE2200U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asus |
| Model | PE2200U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5125 MB |
