Asus PE2200U handleiding
Handleiding
Je bekijkt pagina 66 van 100
66
PE Series
3.8 Installingacellularnetwork
moduletotheM.2(B-key)slot
Your Embedded Computer comes with an M.2 (B-key) slot that allows you to
install a B-key (PCIe x1/USB2.0, type 3042/3052/2242) M.2 device, such as a
4G LTE or 5G NR module.
WARNING! RF modules are intended for OEM or host integrators only.
For availability of system level RF certication, check with your OEM
integrator.
To install a 4G LTE module:
1. Remove the screw from the M.2 standoff.
2. Align and insert the 4G LTE module into the slot.
3. Press down, and then secure it in place using the screw previously
removed.
NOTE: We recommend using a PH1 screwdriver with a torque of
2.0±0.2kgf-cm when tightening the screw.
4. (Optional) Connect the RF cables from the antennas to your 4G
LTE module. Make that the correct cable is attached to each of the
connectors by following chart on the next page.
Bekijk gratis de handleiding van Asus PE2200U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asus |
| Model | PE2200U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5125 MB |
