Handleiding
Je bekijkt pagina 23 van 31
English
21
Chapter 6 Troubleshooting
Problem and Question Possible Solution
Power LED is not on
•
Check if the Power button is pressed and the
monitor is power on.
•
Power Cord should be connected.
No signal
•
Check that the video cable is properly connected.
If the connector is loose, tighten the connector’s
screws.
•
Check the video cable’s connection pins for damage.
Picture is fuzzy
•
Adjust the Contrast and Brightness Controls.
Picture bounces or a wave
pattern is present in the
picture
•
Move electrical devices that may cause electrical
interference.
The power LED is ON (Blue)
but there’s no video or no
picture.
•
Computer Power Switch should be in the ON
position.
•
Computer Graphics Card should be snugly seated in
its slot.
•
Make sure Monitor’s video cable is properly
connected to the computer.
•
Inspect Monitor’s video cable and make sure none
of the pins are bent.
Missing one of the primary
colors (RED, GREEN, or BLUE)
•
Inspect the Monitor’s video cable and make sure
that none of the pins are bent.
Picture has color defects
(white does not look white)
•
Adjust RGB color or select color temperature.
Poor brightness or contrast
•
When the brightness of the screen lowers after
being used for a certain period and the function
of the display is affected, send it to our authorized
service center for repair.
Unable to open OSD menu.
•
Turn off your monitor, unplug the power cord and
plug it back in, then power on the monitor.
Bekijk gratis de handleiding van Asrock CL25FFA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asrock |
| Model | CL25FFA |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3492 MB |
