Handleiding
Je bekijkt pagina 16 van 62
15
Positioning
Zmm cooker hood
700mm
400mm
400mm
60mm
200mm
Min.
X
Y
CLEARANCES REQUIRED
WHEN FITTING THE HOB
WITH A COOKER HOOD ABOVE
This appliance is to be built into a kitchen unit or 600mm worktop, providing
the following minimum distances are allowed;
o
o
o
o
o
The edges of the hob must be a minimum distance of 60 mm from a side or
rear wall.
700 mm between the highest point of the hob surface (including the burners)
and the underside of any horizontal surface directly above it.
400 mm between the hob surfaces, providing that the underside of the
horizontal surface is in line with the outer edge of the hob. If the underside of
the horizontal surface is lower than 400 mm, then it must be at least 50 mm
away from the outer edges of the hob.
50 mm clearance around the appliance and between the hob surface and any
combustible materials.
You must have a gap of at least 25 mm and at most 74 mm between the
underneath of the appliance and any surface that is below it.
25mm(MIN)
45mm
- An oven must have forced ventilation to install a hob above it.
- Check the dimensions of the oven in the installation manual.
- The cut out size must obey the indication.
Model X Y Z
560 480 600
AGW3601N
Bekijk gratis de handleiding van Aspes AGW3601N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aspes |
| Model | AGW3601N |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5200 MB |
