Asko W2084.W/1 handleiding
Handleiding
Je bekijkt pagina 40 van 52
40
FAILURE DISPLAY
In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit.
Info ExitError 3
5
Press the INFO button to display the
error description.
Switch off the appliance and turn it back
on.
Errors indicated on the display unit may include the following:
Error Error indication on the display
unit
What to do?
E0 INCORRECT SETTINGS
Restart the programme. If the error reoccurs, call a service
technician.
E1 THERMISTOR ERROR
Temperature sensor error.
• Inlet water too cold. Repeat the washing program.
• If the appliance reports this error again, call a service
technician.
E2 DOOR LOCK ERROR Turn the appliance OFF and then switch it again ON. Start the
program again. If the error reoccurs, call service technician.
E3 WATER FILLING ERROR Check the following:
• is the water inlet valve open,
• is the filter on the water inlet hose clean,
• is the water supply hose deformed (clipped, clogged etc.),
• is the pressure in the water mains between 0.1 and 1 MPa
(1–10 bar).
Then, press the Exit button to resume the program.
If the error reoccurs, call a service technician.
E6 HEATING ERROR
Water heating error.
Restart the program. If the error reoccurs, call a service
technician.
E7 DRAINING ERROR
Water draining error.
Check the following:
• is the pump filter clean,
• is the drain hose clogged,
• is the drain clogged,
• is the drain hose fitted at the right height (see chapter on
drain hose installation in the instruction manual).
Then, press the Exit button again. If the error reoccurs, call
a service technician.
E10 WATER LEVEL SENSOR ERROR Turn the appliance OFF and then switch it again ON. Start the
program again. If the error reoccurs, call service technician.
E11 OVERFLOW
Water overflowing.
If there is water in the drum that exceeds a certain level,
and an error is reported on the display unit, the washing
program will be interrupted and water will be pumped out of
the washing machine. Restart the programme. If the error
reoccurs, call a service technician.
If there is water in the drum that exceeds a certain level, and
an error is reported on the display unit, while the washing
machine continues to add water, close the water tap and call
a service technician.
E12 MOTOR ERROR / MOTOR
CONTROL ERROR
Restart the program. If the error reoccurs, call a service
technician.
Bekijk gratis de handleiding van Asko W2084.W/1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | W2084.W/1 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4985 MB |
