Handleiding
Je bekijkt pagina 56 van 65
Errors indicated on the screen unit (depending on the model) may include the following:
What to do?Error indication on the screenProblem/
Error
Control unit failure.Control unit failure.E0
Call service centre.
Temperature sensor failure.Thermistor error.E1.1, E1.2, E1.3
Call service centre.
Communication error.Communication error.E2
Call service centre.
Failure on the pump for pumping the
condensate into the condensate tank
Pump error.E3
Call service centre.
Control unit failure.Relay failure.E6
Call service centre.
Control unit failure.Door failure.E7
Call service centre.
Control unit failure.Button failure.E8
Call service centre.
Call service centre.PB/UI software versions are not
compatible.
E9
Call service centre.Error in BLDC motor
communication.
E11
INFORMATION before, during, and after the end of the programme (depending on the model):
What to do?Error indication on the screen
Fill the steam tank with distilled water or
condensate.
Steam tank is empty. Please fill water.
Pour the water through the steam tank filter
located in the condensate tank housing. See
chapter Initial settings before use.
Stop adding condensate or distilled water.Steam tank full.
Close the dryer door before starting or
resuming the program.
Please close the door before pressing start.
Press Start/Pause button to resume the cycle.Cycle was interrupted by power failure. Please
resume.
See chapter Cleaning and maintenance.Please empty the condensation tank before
resuming a cycle.
See chapter Cleaning and maintenance.Clean the lint filter.
See chapter Cleaning and maintenance.Clean the lower lint filter.
56
Errors: what to do?
Bekijk gratis de handleiding van Asko T509HRG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | T509HRG |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 4985 MB |
