Handleiding
Je bekijkt pagina 52 van 65
4 Carefully detach the lining of fibres and
threads from the lint filter, and also clean the
lower lint filter housing with a soft cloth.
With automatic cleaning of the mesh housing
of the lower lint filter (only available in some
models), a few drops of water may drip on the
floor after the filter is removed; therefore, lay
a cloth on the floor.
If the heat exchanger fins are covered with dust and dirt, you can clean them using a vacuum cleaner
with a soft brush attachment.
WARNING!
Without pressing, gently move the brush attachment only in the direction of the metal fins from
top to bottom. Too much pressure can damage or bend the metal fins of the heat exchanger.
INFORMATION!
Lower part of the hosing contains a lint and a filter foam which shall be cleaned thoroughly.
5 Reassemble the foam filter and the lower
lint filter housing.
The lower lint filter must be tilted and inserted
back into the dryer at a slight incline with the
handle open.
6 Close the handle and close the outer cover.
INFORMATION!
The heat pump filter has to be correctly placed into its slot. Otherwise, the heat exchanger installed
inside the dryer may be clogged.
WARNING!
Insufficient cleaning of the filters in the dryer can lead to reduced drying efficiency, increased
energy consumption, overheating of the appliance, and a higher risk of fire and mechanical
damage. Regular cleaning of the filters will ensure optimal appliance performance, shorter drying
times, and minimal energy consumption.
52
Cleaning and maintenance
Bekijk gratis de handleiding van Asko T509HRG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | T509HRG |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 4985 MB |
