Handleiding
Je bekijkt pagina 40 van 65
INFORMATION!
No program can be started while the door is open.
STEP 5: Choosing the program settings
Using the program settings, the drying programs can be further adjusted to your wishes.
Selected program settings will remain stored after the end of the drying cycle and may be changed
subsequently (except for delayed start which is not stored after the drying is complete).
In the selected programme, you can choose between three quick access settings without entering
the programme settings. By directly touching the desired setting, you can change the selection.
Quick access allows you to set:
1.
Load
2.
Dry level
3.
Delay start
For a programme that does not have any of the above settings, quick access is not possible.
INFORMATION!
Some program settings may not be available for your selected program.
For the full set of programme settings, select the programme and enter the programme settings.
Choose the programme settings before pressing Start/Pause.
When the drying programme is underway, programme settings cannot be changed.
The following programme settings may be selected:
Set time
This setting is only possible in the Airing and
Time programme.
You can choose the duration of the drying
period from Off up to 4 hours in steps of 15
minutes or from 30 minutes to 4 hours.
40
Drying process, step by step (1–7)
Bekijk gratis de handleiding van Asko T509HRG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | T509HRG |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 4985 MB |
