Handleiding
Je bekijkt pagina 20 van 65
8 Stick the plastic foot attachments onto the
washing machine.
1. Break off the plastic positioners and peel
off the adhesive film from the plastic plugs.
2. Lift the front part of the dryer and adjust
and hold the plastic plugs on the front feet
of the dryer (make sure that the plugs are
correctly positioned on the right and left
feet, respectively, in relation to the
broken-off particle). Also make sure that
the feet fit properly in the plug.
3. Now lower and position the dryer onto the
washing machine, with the C-plugs
automatically sticking to the surface of the
washing machine.
Built-in
Installation in a cabinet
ASKO's front panel controls make it possible
to install the washers and dryers in a cabinet
or closet.
The distance between the left or right side of
the appliance and the surface of the side of
the cabinet or the surface of the wall of the
recess in which the appliance is installed must
be at least 12 mm. The distance between the
back of the appliance (note the deepest point
of the appliance) and the surface of the back
of the cabinet or the wall of the recess must
be at least 25 mm. See figure.
20
Installation and connection
Bekijk gratis de handleiding van Asko T509HRG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | T509HRG |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 4985 MB |
