Asko HI2842FBG1 handleiding

44 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 31 van 44
General
NOTE!
If you notice a crack in the glass top (however small), switch off the hob immediately and
disconnect the power supply (remove the plug from the socket).
Then contact the Service Department.
Troubleshooting table
If your hob does not work properly, it does not always mean that it is defective. Make sure to check
the points mentioned below in the table, or visit our website for more information.
SolutionPossible causeSymptom
Induction zones
Normal operation.This is the standard set-up
routine.
Characters appear in the
displays when the appliance
is connected for the first
time.
Normal operation.The hob is cooling down.The fan runs on for several
minutes after the hob has
been switched off.
This is normal and disappears after the
hob has been used a few times.
Ventilate the kitchen.
The new appliance is heating
up.
A slight smell is noticeable
the first few times the hob is
used.
This is normal for certain pans,
particularly at high settings. This is not
harmful to the pans or the hob.
This is caused by the energy
flowing from the hob to the
saucepan.
The pans make noise while
cooking.
Use a suitable pan (see chapter Pans).The pan you are using is not
suitable for induction cooking
or has a diameter that is too
small.
You have switched a cooking
zone on, but the display
keeps flashing.
Switch off the signal by pressing the
timer key.
The preset time has ended.A cooking zone suddenly
stops working and you hear
a signal.
Check the fuses or the electric switch
(if there is no plug).
There is no power supply
due to a defective cable or
a faulty connection.
The hob is not working and
nothing appears in the
display.
Check the electrical connections.The appliance is incorrectly
connected.
Er47 or Er400 appears on
display.
Clean the control panel.The control panel is dirty or
has water on it.
Er03 appears on display.
Wait for cooking zone to cool down or
fill the pan with foodstuff.
Empty pan was heated on
the cooking zone.
E2 appears on display.
31
Troubleshooting

Bekijk gratis de handleiding van Asko HI2842FBG1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAsko
ModelHI2842FBG1
CategorieFornuis
TaalNederlands
Grootte2823 MB