Handleiding
Je bekijkt pagina 38 van 44
1 phase - 1 neutral2 phase - 1 neutral
Connection diagram
Consult the wiring diagrams on the bottom of the appliance.
1. Open the cover of the connection terminal box.
2. Run the power cord through a cord strain relief (clamp) which protects the cable from being
pulled out.
Connect the wires according to your type of appliance.
3. Make the necessary connections between the terminals using the supplied terminal bridges .
The terminal bridges are provided seperately.
Place the induction hob into the cut aperture.
Power limiter
WARNING!
Setting the power limiter should only be carried out by a registered and qualified installer.
Please read the safety regulations and the installation instructions carefully.
The hob is equipped with a power limiter. If the total power of operating cooking zones exceeds the
maximum available amount of power, the power is automatically reduced. The display of the cooking
zone who is being reduced in its power is first flashing; the level is then automatically reduced to
the highest available power.
The limiter is set at (2x) 3700 W (7400 W total) by the factory, but it is possible to lower this setting
to a minimum of (2x) 1400 W (2800 W total) (in increments of 100 W).
Power limiter configuration
38
Installation
Bekijk gratis de handleiding van Asko HI2642FBG1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | HI2642FBG1 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2823 MB |
