Handleiding
Je bekijkt pagina 20 van 44
Place the tip of your finger flat on a key or the slider to achieve the best results. You do not have to
apply any pressure. The touch keys only react to the light pressure of a fingertip. Do not operate the
controls with any other objects.
Each key or slider activation is followed by an audio signal.
Start Preparing
1. Touch and hold the on/off key until you hear an audio signal.
• All cooking zone displays show ‘0’ indicating that the induction hob has entered the state of
standby mode.
TIP!
If the hob is not used for 25 seconds, it will shut off automatically.
2. Place a suitable pan on the cooking zone.
• Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
TIP!
As long as the dot is not flashing, the cooking zone is selected and the power level can be
set.
3. The cooking zone automatically detects the pan. To select another cooking zone, touch the
cooking zone key of the desired cooking zone or place a second pan on a cooking zone.
• A single beep sounds.
• The ‘0’ of the selected cooking zone will light up clearly for approx. 3 seconds.
4. Within 3 seconds, set the power level by touching the slider.
• The cooking zone starts at the level that has been set.
• Set a higher or lower level with the slider.
• After 5 seconds the slider will switch off.
20
Operation
Bekijk gratis de handleiding van Asko HI2642FBG1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | HI2642FBG1 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2823 MB |
