Handleiding
Je bekijkt pagina 15 van 27
EN 16
FAULT CAUSE SOLUTION
A burner does not ignite. Control knob not kept pressed
in far enough.
Keep the control knob pressed
in far enough between full and
low. At first use this can take
some more time because of the
gas supply.
The burner does not burn
evenly.
Burner parts incorrectly
installed.
Burner parts dirty or damp.
Wrong type of gas used.
Assemble the burner parts
using the centring ridges.
Clean and dry the burner parts,
making sure that the outflow
holes are open.
Check that the gas used is
suitable for the appliance.
If not, contact your gas fitter.
The burner goes out after
igniting.
Control knob not kept pressed
in long enough.
Keep the control knob pressed
in for at least
5 seconds.
TROUBLESHOOTING
Bekijk gratis de handleiding van Asko HG1984A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | HG1984A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2525 MB |
