Asko DSD8447A handleiding
Handleiding
Je bekijkt pagina 25 van 43
AlternativesSettings
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft
water, the rinse aid can be diluted 50:50
with water.
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct!
0/1/2/3/4/5/6/7/8/9Water hardness6.
See Water hardness in the chapter Before
washing for the first time.
For a water supply with a hardness above
5 °dH (9 °fH / 6 °eH / 0.9 mmol/l), fill with salt.
For a water supply with a hardness below
6°dH (10°fH / 7°eH / 1.0 mmol/l), select 0.
The water softener is deactivated and no salt
needs to be added.
Activate this setting when using an all-in-one
detergent that contains rinse aid.
On/OffTAB
(All-in-one detergent)
7.
This setting reduces the rinse aid dosage
and affects how often the dishwasher's
built-in softener is regenerated.
The Super rinse function rinses the dishes an
extra two times.
On/OffSuper rinse8.
The program time is extended and the
dishwasher uses more energy and water.
Activated in the following programs:
Intensive
Quick
Hygiene
Any error messages.Failure readout9.
When contacting your service centre, you
may be asked to provide the most recent
error messages.
Restores all settings to the factory defaults.Factory reset10.
Select Factory reset and press .
To exit the dishwasher's Settings menu,
select Exit and press .
Exit11.
25
Settings
Bekijk gratis de handleiding van Asko DSD8447A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | DSD8447A |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3794 MB |
