Asko DC7784V.W.UK handleiding
Handleiding
Je bekijkt pagina 31 van 36
31
PROCEDURE
The setting parameters according to the list on pages 28 are shown on the display as follows:
on the top row of the display the relevant parameter is shown, for example P 2014,
on the bottom row the set value of the parameter is shown.
1 Go to programming mode. See page 27.
2 Browse to the relevant parameter by pressing the ARROW UP or ARROW DOWN key repeatedly. If
you go too far, simply continue browsing until the display shows the correct parameter.
3 When the display shows the correct parameter, for example ”P 2012”, press OK to confirm. The row
now flashes with the set value of the parameter.
4 Increase or reduce the value using the ARROW UP or ARROW DOWN key.
5 To save the set value, press OK.
6 To return to operating mode, press DOWN ARROW and then STOP.
RESTORING TO FACTORY SETTING
1 Go to programming mode as described on page 27.
2 Hold down the UP ARROW and DOWN ARROW keys simultaneously and press OK.
The factory settings are saved and the display shows the last run programme.
784416en.indd 31784416en.indd 31 21. 12. 2022 11:05:5821. 12. 2022 11:05:58
Bekijk gratis de handleiding van Asko DC7784V.W.UK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | DC7784V.W.UK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3006 MB |
