Asko DC7784V.W.UK handleiding
Handleiding
Je bekijkt pagina 18 van 36
18
EVACUATION / AIR SUPPLY
When the cabinet is on, 45 m
3
moist air per hour is evacuated. It must therefore be ensured that air can
enter the room to replace the moist air that is vented out.
CONNECTION TO EVACUATION
The drying cabinet can be connected to the evacuation duct in two ways, either with a draft
stabiliser or permanently fitted to a mechanical exhaust ventilation unit.
If the drying cabinet is to be connected to an existing ventilation system, a draft stabiliser must always
be used, so that the general ventilation in the room is not aff ected.
Permanent fitting must only be carried out when a separate exhaust-air duct is routed to the drying
cabinet, the air flow in the exhaust-air duct being adjusted to 45 m
3
per hour.
The drying cabinet has been tested and factory-set for connection with a draft stabiliser.
Place the supplied spigot over the
hole on the top of the cabinet, insert
the screws and secure the spigot.
784416en.indd 18784416en.indd 18 21. 12. 2022 11:05:4421. 12. 2022 11:05:44
Bekijk gratis de handleiding van Asko DC7784V.W.UK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | DC7784V.W.UK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3006 MB |
