Asko DBI8303D.W handleiding
Handleiding
Je bekijkt pagina 37 van 44
Placing the dishwasher
The dishwasher is intended to be built-in under a worktop. Make sure that the edges of the hole are
even and will not damage the drainage and inlet hoses or the supply cord.
[mm]
If the dishwasher is built-in the surrounding furnishings must be resistant to any condensation from
the dishwasher.
Affix the protective film
Mount the protective film beneath the worktop and up around the edge. The function of the protective
film is to protect the worktop from moisture. (The protective film is in the enclosed plastic bag.)
NOTE!
The surface to which the protective film is affixed must be clean and dry.
Adjust the height and slide the dishwasher into place
1. Start by measuring the height from the floor to the bottom edge of the worktop.
2. Measure the height from the floor to the top edge of the dishwasher.
3. Lean the dishwasher forwards a little and adjust the rear foot with the screw at the front of the
dishwasher. Turn clockwise to lower or anticlockwise to raise.
37
Installation
Bekijk gratis de handleiding van Asko DBI8303D.W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | DBI8303D.W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3805 MB |
