Asko DBI344IB.W handleiding
Handleiding
Je bekijkt pagina 21 van 47
If you want to load more dishes
4)
Open the door. The dishwasher stops automatically. Add the dishes and close the door. After a
while, the dishwasher continues the program.
Power failure
If the dishwasher is turned off due to a power failure when a dishwashing program is running, the
program continues when power is restored. If the power is cut during drying, the program is
interrupted.
If you open the door for more than 2 minutes during drying, the program will be interrupted.
Once the program has finished
Once the program has finished, "Program done" appears on the display.
At the end of the program one short signal will sound. Chapter Settings describes how to change
this function.
The dishwasher automatically enters standby mode after the program has finished. Shut off the water
tap after each use (if required by your insurance company).
The best drying results
• Fully load the dishwasher.
• Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important
for plastic items.
• Top up with rinse aid or increase the rinse aid dosage setting.
• Activate the Auto door open option.
• Allow the dishes to cool before unloading the dishwasher.
Unloading the dishwasher
Hot porcelain is more fragile. Leave the dishes to cool in the dishwasher before unloading them.
Unload the lower basket first to avoid any water drops from the upper basket falling onto the dishes
in the lower basket.
4)
You should not load more dishes if the lid of the detergent dispenser has been opened.
21
Using the dishwasher
Bekijk gratis de handleiding van Asko DBI344IB.W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Asko |
| Model | DBI344IB.W |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4226 MB |
