Ashly SP4.8 MKII handleiding
Handleiding
Je bekijkt pagina 18 van 24
18
7.4 Communication Settings
NOTE: User must power cycle the unit for this settings to take effect.
SYSTEM-SETUP MENU: Comm
BAUD :115200
DEV ID:1
NET ID:0
BAUD :
The sets the baud rate of the serial communication. ASHLY Console uses a baud
rate of 115200, it should be left unchanged for most user.
DEV ID:
This control assigns a device ID from 1 to 16 to the unit.
NETWORK ID:
This control assigns a network ID from 0 to 60000 to the unit.
This ID is used for future network expansion only, please leave it at 0
7.5 Security Lock and Unlock
SYSTEM-SETUP MENU: Security
PASSWORD:
PASSWORD:
The password is 4 characters in length. The factory default of a new unit
does not require a password.
The device can be protected for unauthorized parameter and /or system abuse.
The securtity settings can be controlled and stored in the device with the
ASHLY Console GUI only. When the correct password is entered in the device all the
locks are disabled. After reientering the password or powercycling the device,
the locks are automatically enabled again.
Bekijk gratis de handleiding van Ashly SP4.8 MKII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ashly |
| Model | SP4.8 MKII |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2358 MB |
