Ashly SP3.6 MKII handleiding
Handleiding
Je bekijkt pagina 12 van 24
12
6.9 Xover
IN_1: MENU:Xovr IIR
TYPL: Off
FRQL: 0100Hz
TYPH: Off
SLPL:24dB
FRQH:01000Hz
SL PH:24dB
OUT_1: MENU:Xovr FIR
TYPL: Off
FRQL: 0100Hz
TYPH: Off
FRQH:01000Hz
In the input state, click to switch to IIR, in the output state, click again to switch to FIR.
TYPL:
The 3 available filter types for the low frequency crossover point (high pass) are:
Butterworth, Linkwitz Riley or Bessel.
FRQL:
The filter cut-off frequency for the low frequency crossover point (high pass) ranges
from 20 to 30kHz in either 1Hz steps or 1/36 octave steps. The frequency steps can
be selected in the System Menu. Please refer to page 17 for more details.
6.8 Delay
DELAY:
The maximum allowed delay is 62400 samples, with each sample approximately
10us (1/96k). The equivalent delay time is displayed on the right side of the
parentheses. The delay time unit can be set to ms, ft, or m in the system menu.
For more details, please refer to page 17. You can use cursor movement to quickly
adjust numbers
IN_1: MENU:Delay
DELAY: 00000 (000. 000ms)
Bekijk gratis de handleiding van Ashly SP3.6 MKII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ashly |
| Model | SP3.6 MKII |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2358 MB |
