Ashly DigiMIX 24 handleiding
Handleiding
Je bekijkt pagina 15 van 36
15
Operating Manual - digiMIX24 Digital Mixer
4 GETTING STARTED
4.1 Typical Application
The above illustration shows a typical band setup with instrument and vocal inputs, four separate monitor mixes, stereo main speakers,
and remote control from a laptop and iPad. Use the following procedure to safely and quickly set up the system.
1) Plug in all inputs, outputs, and speaker cables. Leave power ampliers turned down at rst.
2) One input at a time, set input trim controls so their loudest signal peaks are around 0dBu on the input meters (sec. 2.1)
3) Assign all desired inputs to the main output using the Assign button (sec. 2.38) or Sends button (sec. 2.45)
4) Select the main output and turn its level all the way down (sec. 2.3)
5)
Turn up power ampliers, then slowly turn up the main fader or volume control (sec. 2.13) until reaching a comfortable level.
6)
Verify that all inputs can be heard in the main speakers or use the solo function (sec. 2.19). Select an input before adjusting.
Bekijk gratis de handleiding van Ashly DigiMIX 24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ashly |
| Model | DigiMIX 24 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10179 MB |
