Handleiding
Je bekijkt pagina 21 van 46
20
Setting The Minimum Flame
The ame on the small output is regulated by the factory.
When the injectors have been replaced or there are special mains
pressure conditions, it may be necessary to regulate the minimum ame
again. The operations necessary to set the minimum ame are as follows:
1. Light the burner.
2. Turn the knob to the minimum position.
3. Take out the knob (and gasket if there is one).
4. ULPG to NG: use a thin blade screwdriver to turn the bypass screw
located above gas valve shaft as shown on the image. Turn gently the
bypass screw clockwise to the end completely then turn it anti-clockwise
1 turn for the triple ring, 3/4 turn for the rapid, 1/2 turn for the semi-
rapid and 3/8 turn for the auxiliary.
5. NG to ULPG: use a thin blade screwdriver to turn the bypass screw
located above gas valve shaft as shown on the image. Turn gently the by
pass screw clockwise to the end.
6. Put the knob back on and turn it quickly from the maximum position
to the minimum position, checking that the ame does not go out.
Figure 3
Bekijk gratis de handleiding van Artusi AFGR935, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Artusi |
| Model | AFGR935 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3830 MB |
