Artusi ADW5008 handleiding
Handleiding
Je bekijkt pagina 21 van 30
7 THE CONTROL PANEL
1
2
3
2.1
98
6
5
7
16 11 12 10
13 14 153.1 4
1. On/Off Button
2. Program Selection Button
2.1. Program Indicators
3. Delay Button
3.1. Delay Indicator
4. Remaining Time Indicator
5. Start/Pause Button
6. Options Button
7. Select Button
8. Child Lock Indicator
9. Rinse Aid Indicator
10. Tablet Indicator
11. Extra Hygiene Indicator
12. Half Load Indicators
13. Energy Save Indicator
14. Extra Fast Indicator
15. Extra Silent Indicator
16. Washing Step Indicators
a- Washing Step Indicator
b- Rinse Step Indicator
c- Drying Step Indicator
d- End Step Indicator
1. On/O Button
Turn the machine on by pressing the
On/O button.
2. Program Selection Button
Select a suitable programme by pressing
the Programme button. The selected
program indicator (2.1) will be on. For the
details of the programs refer to section
Program Table.
3. Delay Button
You can delay the start time of the
programme for 1-2...24 hours by pressing
the delay button (3) before the programme
starts. The delay indicator (3.1) will be on. If
you want to change the delay time,first
press the Start/Pause button and then the
delay button to select a new delay time. To
activate the new delay time, press the Start/
Pause button. To cancel the delay, you need
to switch to 0 hour by using the delay when
the machine is paused.
4. Remaining Time Indicator Programme
flow can be monitored via
the Wash,Rinse, Dry, End indicators and
Remai ning Time Indicator.
5. Start/Pause Button
Press the Start/Pause button to start the
programme. The wash lamp turns on and
the Remaining Time Indicator shows the
programme duration. It also indicates the
remaining time during the programme flow.
If you open the door of your machine when
the programme is running the duration of the
programme pauses,and related washing
step indicator blinks.
6. Options Button
Options can be selected by pressing the
Options button repeatedly. The chosen opti-
on will be indicated by a blinking LED.
7. Select Button
Select the option by pressing the Select
button. The LED for the chosen option will
then remain lit.
8. Child Lock Indicator:
Child lock is activated/deactivated by pres-
sing select button (7) for about 3
seconds.When it is activated, all leds blink
and “CL”is shown on Remaning Time
Indicator (4)once. When it is deactivated, all
lamps and“CL” blink twice. Child Lock
indicator illumi-nates while the Child Lock is
active.
9. Rinse Aid Indicator
When the rinse aid level is low, the rinse aid
lack warning indicator turns on and you
should fill the rinse aid chamber.
EN - 21
Bekijk gratis de handleiding van Artusi ADW5008, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Artusi |
| Model | ADW5008 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4504 MB |
