Artusi ADW5008 handleiding
Handleiding
Je bekijkt pagina 11 van 30
EN - 11
space to do so and the wiring-plumbing
must be suitable to do so (1). If the space
your machine, remove the worktop as
shown in the illustration (2).
The countertop, which
the machine will be placed under, must be
stable in order to prevent imbalance.
The top panel of the dishwasher must
countertop.
To remove the top panel, remove the
screws that hold it on, located at the rear
of the machine. Then, push the panel 1 cm
from the front towards the rear and lift it.
Adjust the machine feet according to the
3).
Fit your machine by pushing it under the
counter taking care not to crush or bend the
hoses (4).
After removing the top
panel of your dishwasher, the machine
should be placed in a space of the
60 cm
A B
All
Products
B
1
B
2
(±2 mm) 820 mm 830 mm 835 mm
If there is no felt on the top of the
product; you should take into account this
product’s height.
: If there is felt on the top of the product
with 2nd basket; you should take into
account this product’s height.
: If there is felt on the top of the product
with 3rd basket; you should take into
account this product’s height.
Bekijk gratis de handleiding van Artusi ADW5008, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Artusi |
| Model | ADW5008 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4504 MB |
