Artusi ADW4509 handleiding
Handleiding
Je bekijkt pagina 37 van 47
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1. .
2. Within 60 seconds after the appliance was switched on press the Self-cleaning
button for more than 5 seconds, and then press the Delay button to enter the set
model, the rinse aid indication blinks as 1Hz frequency.
3. Press the Self-cleaning button again to select the proper set according to your
using habits, the setting will change in the following sequence: d3-d4-d5-d6-
d1-d2-d3. The higher the number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the Power button to complete the setup
and exit the setting mode. The factory setting is :d3.
Close the door, switch on the appliance
11
Filling The Rinse Aid Reservoir
3
Close the cap after all.
1
2
Remove the rinse reservoir cap by
lifting up the handle .
Pour the rinse aid into the dispenser,
being careful not to overfill.
Bekijk gratis de handleiding van Artusi ADW4509, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Artusi |
| Model | ADW4509 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 3709 MB |
