Arturia Mix DRUMS handleiding

58 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 53 van 58
The EQ appears as an interactive graph of gain vs. frequency. You have three points to work
with: three fully parametric EQ bands, with the high and low bands optionally configurable
as shelving filters. Click and drag to set the frequency and gain of any particular point; the
point will be highlighted with a ring.
Once you've highlighted a particular point, the controls on the right will jump to its current
values. You can then dial in more precise numbers if you wish, or access parameters that
aren't controllable from the Visualizer.
Power icon: Turns the entire EQ on or off.
Band: Selects Band 1, 2, or 3 for editing.
Type: Selects shelving (Bands 1 and 3) or peaking (any Band).
Freq: The center frequency of the selected band. Any band can be set with a
frequency between 20 Hz and 20 kHz.
Gain: Amount of boost or cut. The gain range is ±12.0 dB.
Q: Bandwidth of the cut or boost. Settings range from (a very gentle change) to
12.0 (a sharp spike). High Q values applied to shelving filters produce interesting
combinations of boost and cut around the set frequency.
After the EQ (and one more tape clipper to control gain), the signal is ready for output... but
there's one more module available to process the sound.
5.6.2. NOISE
The NOISE module appears to the left of the Visualizer when the EQ module is selected.
Since it's often useful (or just plain cool) to mess up a drum sound with noise, grit, or other
forms of audio dirt, Mix DRUMS includes a set of noise sources that can be added to the
signal chain.
NOISE controls
Arturia - User Manual Mix DRUMS - The Audio Path 48

Bekijk gratis de handleiding van Arturia Mix DRUMS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkArturia
ModelMix DRUMS
CategorieNiet gecategoriseerd
TaalNederlands
Grootte6795 MB