Arturia Mix DRUMS handleiding
Handleiding
Je bekijkt pagina 47 van 58
The Visualizer controls for the Delay are:
• Rate: As above, delay time (watch icon) or sync division (note icon).
• Fine: Fine adjustment of delay time. Range ±50 ms, default 0 ms.
• Width: Gradually broadens ping pong from mono (0.00%, the default) to full
stereo (100%).
• Ping Pong: causes delay repeats to bounce between left and right in the stereo
field.
5.4.5. Tape Delay
This is a delay that emulates old-style analog tape delays, with warm saturation and a
range of settings different than that of the conventional Delay.
The main controls are:
• Rate: Timing of echo repeats. Setting ranges from 10 ms to 1000 ms (default
300 ms) when set to Time, or 1/32 to 8 bars when set to Sync.
• Feedback: Relative loudness of subsequent repeats. Setting ranges from 0.00%
to 100% (infinite repeat) to 120% (runaway). Default is 35.0%.
Feedback values above 100% produce
runaway
, where each successive echo gets louder than the
one before it. This is often used as a special effect, but be careful – left uncontrolled, runaway echoes
can get loud enough to damage speaker cones, not to mention your ears!
As with the Delay above, Rate can be set as a time or as a sync division, with the same
pop-ups as before.
Tape Delay Visualizer
controls
Arturia - User Manual Mix DRUMS - The Audio Path 42
Bekijk gratis de handleiding van Arturia Mix DRUMS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | Mix DRUMS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6795 MB |
