Arturia Mix DRUMS handleiding
Handleiding
Je bekijkt pagina 19 van 58
3.2.3. Output Volume knob
Finally, the Output Level knob controls the output level of the plug-in to your DAW. Output
signal levels are displayed on the OUTPUT meter in the Audio Path window.
3.3. The Visualizer
The Visualizer provides a real-time display of amplitude vs. frequency on a scale from 20
Hz to 20 kHz. It provides a variety of visual feedback and control.
As you can see in the image above, there are different spectra for different kinds of audio
data:
• The Low frequencies (as defined by the Crossover setting) are shown in red.
• The Mid/High frequencies are shown in two shades of orange: reddish for the
Tape [p.34] output, and brighter for the Distortion [p.35] output.
• When Clean Highs [p.36] are enabled, they appear in pale orange-yellow.
• The output spectrum is shown in white.
If you're not sure what you're looking at, try bypassing individual signal processing modules and
watching to see which elements of the Visualizer display disappear.
Depending on which module in the Audio Path is selected, the Visualizer window adds click-
drag controls for crossover and filter frequencies, EQ gain and bandwidth, and left and right
parameter menus for various extra functions.
Output Level knob
The Visualizer
Arturia - User Manual Mix DRUMS - The User Interface 14
Bekijk gratis de handleiding van Arturia Mix DRUMS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | Mix DRUMS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6795 MB |
