Arturia MicroLab MkIII handleiding
Handleiding
Je bekijkt pagina 15 van 28
The touch-sensitive pitch and modulation strips are low-profile controllers that offer a
different take on the traditional "wheel" design while maintaining their expressiveness. If you
touch the Pitch Bend Strip at its center and move your finger forward or backward, it will
raise or lower the pitch of the played sound.
Similarly, moving your finger along the Modulation Strip alters the modulation amount of
the played sound, from no modulation (bottom) to maximum modulation (top).
♪: The amount of pitch bend and type of modulation you hear when using these controls depends
entirely on your selected Preset and how it is programmed. In some cases, you may find that a Preset
may not make use of these parameters and in that case, manipulating the touch strip controls of
MicroLab mk3 will have no effect on your sound.
2.5.5. Shift Functions
MicroLab mk3 has a limited number of controls due to its small size, but the Shift button
allows the buttons, strips and keys to serve useful secondary functions.
2.5.5.1. Chord Mode
Chord mode allows you to program a chord and trigger it by playing only one note on
MicroLab mk3. This can be a fun and creative way to compose and perform music.
To program a chord, hold the Shift and Hold buttons and then play a chord or enter notes
of the chord individually (from 2 to 16 notes). All notes you enter while holding the Shift and
Hold buttons will be recorded as part of your programmed Chord, and the Hold button will
blink slowly to indicate that you are in Chord programming mode.
When you release Shift and Hold, the Hold button will blink slowly to indicate that chord
mode is active. You can now play a single note and it will trigger your programmed chord.
Playing up and down the keyboard will transpose your programmed chord, with the lowest
note being the reference note for the transposition.
To exit Chord mode, press and release Shift and Hold buttons again. The Hold button will
stop blinking and the keyboard will return to normal operation.
The Hold/Chord button blinks slowly when Chord mode is active
Arturia - User Manual - Overview 11
Bekijk gratis de handleiding van Arturia MicroLab MkIII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | MicroLab MkIII |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3352 MB |
