Arturia KeyLab 88 mk3 handleiding
Handleiding
Je bekijkt pagina 72 van 80
5.4.12.2. Pad General Settings
These are your options when adjusting the Velocity Curve for the Pads.
• Linear: Playing a Pad softly sends out a low velocity value, play harder and
KeyLab mk3 will output higher velocity. "What you play is what you get".
• Logarithmic: Going from soft to a little louder results in a much louder sound. This
curve rises fast and flattens out at higher velocities.
• Exponential: The opposite of logarithmic. An exponential curve changes slowly at
first, but then the rate of change speeds up.
• Fixed: No velocity sensitivity at all. Set the fixed value in the row below.
• Custom: You can freely edit the velocity response in the Custom Editor on the
Global settings page.
• Pad Aftertouch can be edited in a similar fashion, except there is no Fixed
parameter for Aftertouch.
• Aftertouch Min/Max: You can limit the aftertouch range. This is useful if, for
example, you want to avoid using excessive amounts of modulation.
5.4.12.3. Pad Bank A–D
These 4 menus are identical. Each one contains 12 submenus for the 12 Pads.
There is a clever shortcut that lets you reach the right page for every Pad in every Bank.
Simply long-press Settings and tap any Pad. If you land on the wrong Bank, long-press
Settings, then hit Bank– or Bank+, and finally the Pad you want to edit.
65 Arturia - User Manual KeyLab 88 mk3 - User Program
Bekijk gratis de handleiding van Arturia KeyLab 88 mk3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | KeyLab 88 mk3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9684 MB |
